Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs
(475 reviews)
Price: $22.41
Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs
Retail:$33.69
Our Price: $22.41
You Save: 33%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (475)
- Q & A (0)
- Videos (2)
- Photos
Pro Series Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- Wheel w Caster Assembly
- Pro Series
- 6 Inch Wheel
- 2 Inch Diameter Tubing
Corrosion-resistant, removable caster has fitting for 2" jack tube and is rated at 1,200 lbs.
Features:
- Caster assembly fits jacks with 2" tubing
- Swiveling caster
- Clear zinc finish on caster base resists rust
Specs:
- Fits: jacks with 2" diameter tubing
- Wheel diameter: 6"
- Capacity: 1,200 lbs
- Limited 1-year warranty
1400750340 Pro Series 6" Caster with Pin - 1,200 lbs
1400750340 Fulton Removable Caster and Pin Assembly
Item # PS1400750340
California residents: click here
Video of Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Pro Series Trailer Jack PS1400750340 Review
Today, we are going to review Part Number PS1400750340. This is the Pro Series 6 Inch Detachable Caster with the Pin for 2 inch diameter jacks. It has a 1200 lb. capacity. This caster assembly is designed to fit jacks with a two inch inner tub. This is a swiveling caster so when you have this installed, you can see that it will swivel. They do use a clear zinc finish on this caster base to help resist rust.
I will show you the pin. It pops right off. Again it is designed when you measure this, the outer is 2 1/4. The inner is 2 inches. The inner tube of your jack would slide in here and then you would run your pin through this, through the hole in your inner tube and then clip it into place to hold it into position. It is designed as a, the wheel diameter, it is called a 6 inch jack and the reason that is the diameter of this wheel you can see if I put a ruler on it, it is going to be right at 6 inches.
Again, the capacity is 1200 lbs. and it is stamped on the side here so you do want to make sure that when you do put this on a jack that might be rated at 3200 lbs. that when you put it on a wheel, it will limit you to the 1200 lb. capacity. That should do it for the review on Part Number PS1400750340. This is the Pro Series 6 Inch Detachable Caster with the pin for 2 inch diameter jacks and a 1200 lb.
weight capacity. .
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs - PS1400750340
Average Customer Rating: 4.8 out of 5 stars (475 Customer Reviews)
Corrosion-resistant, removable caster has fitting for 2" jack tube and is rated at 1,200 lbs.by: Jimmy07/16/2022
The Pro Series 6" removal caster wheel fit the 2" shaft on my trailer jack like it was supposed to fit. Excellent product.
by: Wayne09/28/2023
Item was delivered fast.(four buisness days) it fit the 2000 lb jack perfectly. Now I can get the trail on and off the truck effortlessly.
by: TOCAS1805/26/2024
Looks and fits as advertised. Bigger wheel diameter than expected but that’s not a problem. Proof of quality we be in the durability. Ask me again in 6-12 months
by: Tyson04/15/2019
Great wheel with a nice clip. Fits the ultimate trailer jack perfectly.
Tyson
4/16/2020
still working great
by: Dennis M04/28/2014
Here are some pictures of what I used your product for. The splitter just had a fixed position stand and it is fairly heavy so it was difficult to hook to the ranger because the stand had to be removed first. Now I can just let it down to the hitch and with the wheel I can also move it around the shop without lifting it. We also put an extra mount on the back so the wood falling from the splitter would not damage it. Thanks for the good service,
by: Ceril01/14/2023
Fit and quality is excellent
Ceril
1/15/2024
My popup camper trailer jack did not have a caster wheel so adding this product solved that. It works well.
by: Mike02/25/2020
Super easy to install and super easy to move the trailer around on garage floor. Enables me to tuck the trailer right up against the wall.
by: Michael 04/25/2023
This trailer jack wheel is heavy duty and fits my 2000 lb utility trailer jack perfectly and allows me to move the trailer around even when loaded.
by: Mervyn R.05/03/2013
This helps to complete my wife's latest toy.. We have had many different campers and motor homes during the years. This is a great down size. The caster helps greatly whem parking the trailer .
Thanks.
by: Ken B05/28/2020
This item does the job I intended. My enclosed motorcycle trailer came with a sand pad only. This sand pad is the right thing for most of what I need it for. However, the trailer jack wheel in this review did its job one time. This is not to say it failed after one time. I am saying I've only used it ONCE and it performed well.
It is considerably taller than the sand pad, so with the sand pad attached to the jack I had to jack up the front of the trailer with its jack as far as it would go, drive under the top of the drop hitch with the tongue of the trailer and slowly lower the trailer down on TOP of the 4" drop hitch (wheels chocked on the trailer, of course). Then, after raising the jack all the way back up, I very carefully removed the sand pad and replaced it with the caster. Once that was done, I screwed the jack back down until it rested on the caster. I was then able to position the trailer into it's tight parking spot front-end first at the hotel. FINALLY! We were all set for a week of riding the beautiful mountains of Colorado!
Ken B.
5/30/2021
Great! Only had to use it once though.
by: Karen L. 09/03/2016
This worked perfectly for my 1956 Mercury trailer without any modification.
by: Joseph 06/26/2023
This is a high quality product and I'm very pleased with the replacement fit. Works great.
by: Bruce 11/28/2019
This is a Great jack wheel to keep the trailer "UP" when the jack is holding the tongue up off the ground. No need for blocks etc. maybe put something flat under the wheel like an old frying pan, piece of steel etc. so it doesn't sink into mud. It also helps if you want to roll the trailer around on most surfaces as you don't have to lift the tongue of the trailer.
Bruce
12/22/2020
Awesome
by: Sherry09/30/2014
I wanted another wheel to put on my Ram Jack, but was told by etrailer it wouldn't fit. Suggested this one and it is a perfect fit. I still have not tried to roll the trailer w/the Seadoo on it. The original jack on the trailer is useless to roll the trailer. So I installed this one. I always call etailer and tell them my plans before purchasing. They are very informative! Thanks, Sherry:)
Sherry
9/30/2015
Its perfect! No problems at all. Im glad I called first before ordering. I would have ordered the wrong product. :
by: Sardog107/21/2016
The Pro series 6" Detachable Caster is just what I needed. The tongue jack that came with my trailer only had the welded on foot pad which made it difficult to move around at home and at the campsite. I cut the foot off, drilled a hole for the caster pin and now have a much more functional trailer. The quality of the caster is excellent. eTrailer has the best service from start to finish.
Sardog1
7/21/2017
Still rolling along! Zero issues over the past year.
by: Lynn G.01/13/2012
The inside diameter of the receiver is large/slopp compared to my original, so the fit is more sloppy, which could cause some torque and metal fatigue on my trailer jack pipe. Also, this product is not keyed as was my original. My original was made in the US. This product was made in China. Finally, I ordered two - a replacement and a spare wheel - but only one of the wheels came with the pin. So, when I go to use the replacement wheel, I will have to use the old pin, which will be very rusty by then (I use my trailer for launching my boat in salt water).
Patrick B.
11/30/2012
We are having a replacement pin sent out to you so both wheels have a pin.
by: Stanley 10/17/2020
This 6" caster wheel enables me to move my 16 foot car hauler trailer on level asphalt or concrete manually. This makes hook up to my class A Motorhome much easier. I can now store the trailer in my driveway by hand. Courtney B. was very helpful during my order of several items.
Stanley C.
10/20/2021
This wheel makes moving my trailer by myself easy. Easy to install and remove.
by: Ted02/25/2018
The 6” caster wheel for my trailer jack was a great purchase. It has allowed me to move my trailer around the shop effortlessly. I would certainly add another one to any jack with a standard sand plate. It has held up really well!
Ted
2/25/2019
Still providing easy movement of my trailer around the shop!
by: P. Stimp12/08/2014
Item was delivered exactly as described by other viewers. It was built much heavier than I expected and will work great on my utility trailer. This wheel allows me to roll my trailer around in my garage or paved parking lots much easier and with less strain on my back.
P.Stimp
P. S.
12/8/2015
hello,I am still just as happy with the item and will continue to shop etrailers.com in the future. The items I have purchased have worked as described and the customer service at etrailer.com have been some of the best I have experienced with any on-line purchase.
by: Kate D12/21/2016
My new horse trailer needed a replacement jack wheel (after I misplaced mine! !) I found etrailer and found what I needed at a terrific price. Was exactly right and arrived quickly. Thank you!
Kate D.
12/21/2017
Still works like a charm!
by: Anteneh05/21/2020
Easy to install and good quality product. The length of the tire is big enough to roll it over a grass. It make it easy for my 5x8ft Big Tex trailer.
The video that describe the product before I place an order was VERY informative.
Anteneh
5/22/2021
It still works as expected and very happy with it.
by: Tracy09/20/2022
Wheel will not rotate under load when trying to push trailer tongue around.
Jenny N.
10/4/2022
You mentioned that it is not rotating while under load. I wanted to ask you a few questions. What type of surface are you using the wheel on. Generally, these are going to work out best on a flat surface, concrete, asphalt, things like that. When used in gravel, sand, mud, dirt, it is going to want to sink in slightly or not roll as smoothly, so definitely keep that in mind. What is the weight capacity of the trailer? How far are you extending the jack? It is extended too far it will put a lot of pressure on the connection point up here when maneuvering it. Just keep that in mind.
by: Bill Huffman11/18/2013
The product is exactly what I needed. I was unsure of which jack caster would fit my jack and sent an email requesting advice as to which one I should order; ordered during the weekend and received it within five days with regular shipping. This was my third order with etrailer and each time the item arrived before I expected it.
Jim
12/8/2013
hi I need a wheel that spins because the jack pipe has an indent that prevents the pipe from spinning does the wheel spin when pinned in
by: Mark L.06/02/2016
Easy to install. I used this on my 6x12 cargo trailer to help move it around on my driveway.
Mark L.
1/23/2018
I have since sold the trailer but I have hit your company up several times for information regarding products and tips and I always received great information.
by: Aaron08/24/2020
Yep, its a wheel for the tongue jack. Fit and works just fine. I don't think I'd want to try rolling it around with 1200lbs on it, but its plenty solid enough for me, especially for the price. Good value!
Aaron C.
8/25/2021
After one year still fine. It does its job and its held up. My trailer gets rolled around a lot on dirt and concrete and its been fine. Very good value.
25
475
Show More Reviews
See what our Experts say about this Pro Series Accessories and Parts
- Availability of Replacement Jack WheelsWe do carry several jack wheels which I have attached at a link on this page. You can check out the link and see what would fit what you have or you can let me know what jack you have and I'll pick out correct wheel if we carry it.
view full answer... - Wheel Caster Recommendation for a Bulldog Jack part # BD1541150301Yes it will, the Bulldog Jack part # BD1541150301 that you referenced has a 2 inch diameter tube and the Pro Series 6", Detachable Caster w/ Pin part # PS1400750340 is designed to fit 2 inch diameter jack tubes so it would work well for you. The # PS1400750340 only has a 1,200 lb capacity.
view full answer... - What are the Dimensions of the Outer and inner Tubing of Trailer Jack # PS1401000303I went out to the warehouse to measure the Pro Series Round, A-Frame Jack, # PS1401000303. The outer tube is 2-1/4 inches in diameter. The inner tubing is about 1.97 inches in diameter. This jack does not come with a wheel or footplate. For a wheel, you can use # PS1400750340. For a foot plate, you can use # PS1400700340.
view full answer...
- Trailer Jack Option for Trailer with 1-3/4 inch Hole for Jack Leg to FitAll of the sidewind jacks like the part # PSRV20000103 will have an outer diameter of 2 or 2-1/4 inches. This one happens to be 2-1/4 inches. You would have to open up the lower hole to match the correct size of the larger jack. A qualified fabricator in your area would have no problem doing this. This jack would work great for you as it has more than enough capacity. For a foot plate you would need part # PS1400700340 or a wheel caster # PS1400750340.
view full answer... - Recommended Trailer Jack With 1,500 lb Capacity and Retracted Height of 12-3/4 InchesThe Fulton Snap-Ring Swivel Marine Jack with Fixed Length - 400 lbs # F1410050149 has a fixed height of 14-1/2 inches. We don't have a fixed height option for a 1,500 lb jack, so I recommend the Fulton Bolt-Thru Swivel Marine Jack - Bolt On # FXP15L which is shorter at the retracted height of 12-3/4 inches but also extends to 24-3/4 inches. I've attached a couple videos to assist.
view full answer...
- Wheel Caster Recommendation for a Pro Series Jack part # PS1401000303 The correct wheel caster to use with the Pro Series Jack part # PS1401000303 would be the Pro Series Caster part # PS1400750340.
view full answer... - Is There a Swivel Jack with Snap Ring Compatible with 15 Inch Lift and Caster with 1200 lb Capacity?All of the 15 inch lift jacks with the snap ring are rated for 2,000 lbs or more. The reason why you aren't finding a wheel in that lift is because the wheels are not rated for that capacity. The jacks with the integrated wheel don't have the same lift, but they do have a wheel diameter that impacts the height adjustment. The Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 has a 6 inch diameter wheel so the bracket height will be...
view full answer...
- Replacement Trailer Jack Recommendation for a 2005 Haulmark Transport 6X10 I looked up some pictures of your trailer and it looks like the style of jack that came on your trailer is an A-frame style jack like part # PSRV20000103. This would be a great jack to use as a replacement as it should replace what you currently have and has plenty of capacity. I feel confident recommending this jack because of how many positive reviews it has as well. You may also be interested in a wheel caster part # PS1400750340 but should note that it would reduce the capacity of...
view full answer... - How Does the Pro Series Detachable Wheel Caster # PS1400750340 Install on a JackThe jack tube would fit in the top of the Pro Series Detachable Caster, # PS1400750340. I have attached a review video of a Pro Series jack that shows how the wheel caster installs. If you would like, you can skip to the 3 minute and 40 second mark to see the wheel caster installed on the jack. The inner diameter of this wheel caster is a hair larger than 2 inches, so it will work well with any jack tube that has an outer diameter of 2 inches. Keep in mind, using the caster will limit...
view full answer... - A-Frame Trailer Jack Recommendation for a Mallard Hoppy CamperThe jack that I recommend for you is the Bulldog Round Sidewind A-Frame Jack, # BD1550101344. This jack has a weight capacity of 1,200 lb when you use the recommended wheel caster, # PS1400750340, which is more than enough for your trailer. This jack has a retracted height of approximately 13 inches with the wheel attached and 7 inches without the wheel. You may not be able to tow with the wheel attached, but you will have more ground clearance than the Atwood jack and the wheel is easy...
view full answer...
- Length of Pro Series 2K A-Frame Trailer Jack from Mounting Bracket to Bottom and Pin Hole DiameterOn the Pro Series Round, A-Frame Trailer Jack, # PSEA20000103, it measures 8 inches from the mounting bracket to the bottom of the inner tube. For the footplate, # PS1400700340, or the Wheel, # PS1400750340, (both fit this jack) the pin diameter is 5/16 of an inch and the length is 2-3/4 inches. The slotted holes on the mounting bracket measure 7/16 inches wide by 7/8 inches long. They are 3 inches apart on center.
view full answer... - Will Bulldog A-Frame Jack # BD1550101344 Fit 2,000-Lb Boat and Trailer and Be Corrosion-ResistantThe Bulldog Round Sidewind A-Frame Jack, part # BD1550101344, has a lift capacity of 3,000 lbs and will work fine on your 2,000-lb boat and trailer for lift capacity. The lift capacity means this jack is able to lift and support up to 3,000 lbs. An A-frame jack like the Bulldog is mounted on the tongue of the trailer so it is rated to lift the tongue weight of the boat and trailer. If you have a 2,000-lb boat and trailer, the tongue weight range would be 10 to 15 percent or 200 to 300...
view full answer... - Replacement Trailer Jack with Wheel for Camping Trailer ApplicationFor your diameter requirements, I assume you are referring to the lower leg outer diameter. All standard jacks like the Bulldog Round Jack without Mount - 2K # BD1500520317 have a 2-1/4 inch diameter for the top outer tube and a 2 inch outer diameter for the lower. You can use the Pro Series 6", Detachable Caster # PS1400750340 for this application.
view full answer...
- Removing Caster of Bulldog Rack-and-Gear Jack # BD162300According to Bulldog, the caster wheel of the # BD162300 could theoretically be removed, but it is not recommended. If the bolt holding the caster is removed, and the caster is slid off the tube of the jack, there are washers and ball bearings that will fall out of the bottom of the jack that will be very difficult to replace. This jack was not designed to have the caster removed and replaced with a foot plate. The Pro Series # PS1401000303 might be a good option. From the mounting bracket...
view full answer... - Replacement A-Frame Trailer Jack for 2017 Rockwood HW296 Tandem Axle Pop-up Camper TrailerWe can help you select a new A-frame tongue jack for your 2017 Rockwood HW296 tandem axle pop-up camper trailer. Since these jacks use a standardized mounting pattern all you need to do is match up the weight capacity. this camper trailer has a GVWR (gross vehicle weight rating) of 5000-lbs. For a value option consider the Pro Series topwind jack # PS1400600303 that can be used with caster wheel assembly # PS1400750340. For a sturdier option use Bulldog jack # BD155032 with caster wheel...
view full answer... - Replacement Caster Wheel for Haul Master Jack with 2 TubeThe # PS1400750340 will work for you as long as the tongue weight on your trailer is not greater than 1200-lbs. Wheels always reduce the weight capacity.
view full answer... - Availability of Side-Pipe-Mount Caster Wheel Sidewind Trailer JackWe do not have an existing jack that meets all of your criteria: side-frame mount, 2000-lb minimum rating, caster wheel, 15-inch lift, side-wind operation and pipe mount. The reason is that a caster wheel on a jack will rarely be rated as high as 2000-lbs. Most caster wheels top out at 1500-lbs or less, such as the 1200-lb-rated # PS1400750340, which fits a 2-1/4-inch jack tube like that on Bulldog Jack # BD1541150301. The thing is this jack has only a 10-inch lift. Other than that this...
view full answer... - Will The Fulton Wide-Track Wheel Assembly # F500266 Fit Wells Cargo 2 Inch Jack TubeI do have a solution for a replacement wheel for your standard 2 inch jack tube, but the Fulton Twin-Track Wheel Assembly, part # F500266, will not work. This wheel assembly is designed to specifically fit the Fulton F2 jacks only. For a replacement wheel, you will need to use the Pro Series Detachable Caster, part # PS1400750340, which will fit your 2 inch jack tube and has 1,200 lb capacity.
view full answer... - Does Pro Series Detachable Caster Swivel?Yes, the Pro Series 6" Detachable Caster # PS1400750340 does swivel. If you check out the video I've linked for you, it will display this at about the 0:20 mark. This caster is designed to fit jacks with 2" tubing and has a 1,200 lbs rating.
view full answer...
- Which Wheel Fits the Pro Series A-Frame 2,000 Pound Trailer Jack # PSRV20000103The correct wheel for the Pro Series A-Frame Trailer Jack # PSRV20000103 that you referenced is # PS1400750340. With the wheel on the capacity of the jack will be limited to 1,200 pounds. We also have a foot that will fit should you need one, # PS1400700340. The capacity will stay at 2,000 pounds when using the foot.
view full answer... - Caster Wheel for a 2,000 Pound Pro Series A-Frame Trailer JackIt sounds like you most likely have Pro Series Round, A-Frame Jack w/ Removable Footplate - Topwind - 14" Lift - 2,000 lbs Item # PSEA2000-14007. To add a wheel use # PS1400750340. However the wheel is rated for 1,200 pounds so the jack will be limited to that even though it is rated higher.
view full answer... - Can Pro Series Jack Wheel, # PS1400750340 Handle a Trailer Tongue Weight of 535 PoundsThe Pro Series Jack Wheel, # PS1400750340, has a capacity of 1,200 pounds. Since the weight that will be on it is the tongue weight, maybe a little higher depending on where the jack is positioned, the wheel should be able to support the weight without issue. If the trailer weighed in at 7,500 pounds and the tongue weight was at 10 to 15 percent, that would be a range of 750 to 1,125 pounds. The upper capacity is close to the capacity of the wheel but still under it. At 3,500 pounds,...
view full answer... - Need Tube Dimensions On A Caster Wheel For A 2 Inch O.D. Tube On A Trailer Tongue JackThe tube diameters on the Pro Series 6 Inch, Detachable Caster w/ Pin, part # PS1400750340, is 2 inch inside diameter and 2-1/4 inch outside diameter. The down tube on a 2 inch jack will fit inside the 2 inch tube on the caster. You will need to make sure that the jack will have the hole in the down tube for the pin on the caster to go through and hold the caster to the jack. Also, both of the casters have a weight capacity of 1,200 lbs. If these casters are used on a jack with a higher...
view full answer... - Will the Wheel Rotate Separately from the Jack Tube on the Pro Series Caster # PS1400750340The Pro Series Trailer Jack Caster Assembly, # PS1400750340, will work for you as long as your jack has an inner tube with a 2 inch outer diameter. The wheel on this caster assembly rotates separately from the part that attaches to the jack tube. We had the caster assembly in stock so I made a short video for you.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Joshua S
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jimmy
7/17/2023
The caster wheel has performed very well considering the amount of times it gets used. I still say its a very good product.